Still under construction

This repository is under construction. It will be restructured after all individual parts are updated. You can find the dependencies in the gitlab parent folder of this repo.

Flexsensor

An automation software for FormFactor Cascade Summit200 Probe Stations. FlexSensor is a software that allows to automate measurements using the FormFactor Wafer Prober.

FlexSensor is a standalone Python application. Its versatility allows for immediate deployment, without prior programming knowledge. Particularly noteworthy are its post-processing capabilities, however, the software's core functionality is the use of the automated measurement routine to acquire the resonant spectra of photonic devices, integrated within a specialized measurement system, as detailed in Section

Installation

Create a virtual environment (highly recommended)

python -m venv .venv
source .venv/Scripts/Activate

Prior to using the software, these packages need to be installed.

pip install rich PySide6 pyyaml matplotlib pyqtgraph pandas scipy numpy

Measuring using Flexsensor

Input Structure File

The measuring process relies on a vas-File that store the positions to the structures. in priciple this file os a list of python dictionary in a predefined format, that allows the easy definiton on how to measure the structures. The file allows python-style line comments using the #-sign

Comments and Bookmarks

# First structure to measure  
# group="mrr1"

Sometimes it is useful to have the Klayout-positions bookmarked. Using the Klayout-Coordinates, the software creates a readable Bookmark file that can be used in Klayout.

# Bookmark this view
mrr1_bookmark = { 'x_left': 19012, 'x_right' : 20708, 'y_bottom' : 20185, 'y_top': 21866 }

Defining a measurement point

Defining a measurement point requires the input position (x_in, y_in) and the output position (x_out, y_out). The keyword repetitions allows to define the number of repeated measurements of the same structure (e.g., for statistical evaluation, etc.)
These positions are relative and measured from a predefined point (See Sec ...) on how to select this point which can be chosen arbitrarily.

mrr1_ref = {'y_in' : -2120, 'x_in' : 960, 'y_out' : -2120, 'x_out' : -155, 'repetitions': 2}

Sometimes it is useful to define a group of measurement points that are equally spaced in x-direction. For this, the spacing and num-keyword can be used. Using these values, the software will automatically generate a list of num structures, equally spaced in x-direction using the spacing value.

mrr1     = {'y_in' : -1845, 'x_in' : 960, 'y_out' : -2015, 'x_out' : -155,  'num' : 6, 'spacing' : 100, 'repetitons': 200}

Setup bevore measuring

1. Open the correct wafer map. Open the wafer Map under Velox -> WaferMap. Load the correct wafer file and select or deselect dies you do not want to capture. Note: Make sure that the die and wafer size is correct.
2. Auto-Align the Wafer For this open the "AutoAlign" Wizard and find a suitable alignment structure.
3. Place at "your" origin The structure file relies on "relative" positions to a point you find a suitable structur which is defined as the "die" origin. This is used to measure the distance to the to/be measured strcutures. Use the same mark in zour Klayout file and on the wafer. If you have not yet created a list for measuring your structure, you can use

• the wafer prober find the right coordinates.
• the KLayout-File for measuring the structures

5. Set contact height Set our fiber to the correct height. Then use the "Set Contact height". Otherwise the measurement routine will fail!
6. Train the Home Positions This step is crucial and needed to train the output positions.

Lincence and usage

This software is licenced under the GNU GPL v3. If you use this software for your work or in your papers please cite me the following:

FAQ&Issues

This section should cover the issues that may occure during usage or development.

Installation issues and running

There are some combinations of pyside6 and pyqtgraph that may lead to incompatibility issues. Especially PySide 6.5.0 and pyqtgraph 0.13.2 installation lead to

TypeError: GraphicsWidgetAnchor.__init__() takes 1 positional argument but 2 were given

Solution: Remove your current installed pyqtgraph and install the latest version:

pip install git+https://github.com/pyqtgraph/pyqtgraph@master